Stefanos Gkougkoustamos

While this is an effective technology, it doesn’t stop all potential blockages and obstructions.. Fortunately, it’s easy to remove the Motorbar’s brush bar for maintenance.

whenever you clean the filter.Numatic bags are relatively cheap and a new bag will ensure your vacuum is working at its best.. Never Use a Henry Hoover Without a Bag.

Stefanos Gkougkoustamos

The bag plays an important role in protecting the filter and motor from all the dirt that’s sucked up.. Never use a Henry without a bag., as this will quickly clog the filter and may damage the motor..Step 5: Fit the Filter and Attach the Head.

Stefanos Gkougkoustamos

Once you’ve cleaned the filter and replaced the bag, all that’s left is to put the filter back into the tub and re-attach Henry’s head..If you’ve cleaned a lot of dirt and dust from the filter, you might be surprised by how much more suction power Henry can now generate!.

Stefanos Gkougkoustamos

When Should You Buy a New Henry Filter?.

As Henry filters aren’t washable, they occasionally need to be replaced.A burnt rubber smell is often caused by a damaged drive belt.

These belts are only found on upright vacuums with a rotating brush bar, so you can skip this step if your vacuum’s floorhead doesn’t have a brush..Vacuum belts turn the rotating brush bar in the floorhead, but can become stretched or torn over time.

When damaged, they may overheat due to extra friction, leading to an unpleasant burning rubber odour.. You’ll need to install a new vacuum belt to solve the burning smell, as vacuum belts can’t be repaired.Fortunately, a vacuum belt is usually straightforward to replace and cheap to buy.. On a similar note, a blockage to the brush roll or drive belt can cause a burning smell.